Hoisting carbonization furnace common faults and troubleshooting methods

Hoisting carbonization furnace common faults and troubleshooting methods

Problem：Insufficient carbonization of materials

Reason：Material water content is relatively large

Solution:

①Lengthen the time period of carbonization

②Control the moisture of the material below 25%

Problem：The degree of carbonization of the finished carbon is different

Reason：The size of carbonized raw materials is different

Solution：Try to place uniformly sized materials (below 10cm) in the carbonization furnace

Problem：The temperature does not rise

Reason：

①The raw material is too wet

②The materials placed in the carbonization furnace are stacked too densely

Solution：

①Control the moisture content of raw materials below 25%

②Reduce the materials in the inner furnace

Problem：Air leakage

Reason：The interfaces are not tightly sealed

Solution：Strengthen the sealing of each interface