Horizontal Carbonization Furnace

Horizontal carbonization furnace is an environmentally friendly and smokeless carbonization equipment. The furnace tank adopts the method of laying flat, using internal heat circulation type heating, heating and decomposing in an oxygen-free state, and finally achieving the purpose of carbonization. It can directly carbonize raw wood, wood block, tree bark, coconut shell and other raw materials.

 

Raw materials and finished products

Henan Olten Environmental Sci-Tech Co., Ltd.

Working principle

Put the materials that meet the requirements (size less than 20cm, moisture less than 20%) into the carbonization basket, and send them into the carbonization furnace by the kiln car; after the furnace door is sealed, it is heated without oxygen, and pyrolysis is carried out through dehumidification. Into combustible gas, tar and carbon; the gas produced in the process is processed by the flue gas purification device to achieve smokeless emission; the combustible gas is collected and sent to the bottom of the furnace for combustion and utilization, thereby reducing the use of fuel and achieving a reduction the cost of fuel.

Henan Olten Environmental Sci-Tech Co., Ltd.

Product advantages

1.Horizontal Carbonization Furnace body is designed in three layers, and the furnace door is equipped with flame-retardant thermal insulation cotton, which has good airtightness, good thermal insulation and fuel savingThe furnace body has a three-layer design, the furnace door is made of thicker material, and is equipped with a high load-bearing link device, which is not deformed and not easy to age. The furnace door is equipped with flame-retardant thermal insulation cotton and asbestos packing is installed at the joints, which has good airtightness, good thermal insulation and fuel saving.

2.Horizontal Carbonization Furnace equipped with flue gas recovery device to save fuel; advanced three-stage flue gas purification device to achieve smokeless emission.

3.Horizontal Carbonization Furnace kiln car design saves labor and is easy to operate. Various heating methods, available with wood, coal, natural gas.

Henan Olten Environmental Sci-Tech Co., Ltd.

Core components

1.Shell: thickened carbon steel. High temperature resistance, corrosion resistance, no deformation.

2.Liner: Q245r boiler steel plate, high temperature resistance, high heat preservation.

3.Insulation layer: high-aluminum refractory insulation brick, flame-retardant insulation cotton. High temperature resistance, good heat preservation.

4.Kiln car: thickened channel steel, high strength, no deformation, high temperature resistance.

5.Purification and flue gas recovery device: thickened carbon steel. High temperature resistance, corrosion resistance, no deformation.

Model Capacity(t/day) Power(kw) Weight(t) Inner furnace diameter Outside diameter Furnace internal volume
WSC150-1 0.8-1 1.5 4.6 1.5*3m 2.1*3.5m 5.3cbm
WSC150-2 1-1.5 1.5 5.6 1.5*4.5m 2.1*5m 8cbm

 

production line

Henan Olten Environmental Sci-Tech Co., Ltd.Henan Olten Environmental Sci-Tech Co., Ltd.

Get In Touch

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

  • *
  • *
  • *