Charcoal Stick Briquette Machine

Charcoal stick briquette machine can be charcoal powder, carbon residue, bamboo charcoal, coconut husk charcoal, rice husk charcoal and other raw materials can be extruded. The finished rods produced can be used for various environmental protection applications such as barbecues and heating, and are also widely used in industries such as chemical, metallurgy and ceramic firing.

    • Henan Olten Environmental Sci-Tech Co., Ltd.
    • Henan Olten Environmental Sci-Tech Co., Ltd.

Working principle

When the charcoal stick briquette machine is working, the materials after bonding and mixing are fed into the feeding barrel. Under the action of the motor and the reducer, the pulverized coal at the rear of the barrel is strongly pushed forward by the screw, and the pulverized coal is compressed and formed by the forming barrel. , And finally extrude from the die hole of the front head.

Henan Olten Environmental Sci-Tech Co., Ltd.

Product advantages

1. The feed screw lead is large, the feed is fast, and the advancing screw lead is small, which saves power.

2. The shaft seat and the cylinder are rigidly connected, with high concentricity, anti-reverse thrust, and the machine is stable.

3. The connection of each part of the equipment is connected by bolts, and the four-stage spiral is connected by buckles, which is convenient for customers to replace and maintain.

4. Large output, high efficiency, low investment, and small floor space.

5. The mold can be customized according to customer requirements, the diameter can be 50mm, 60mm, 70mm, 80mm, and the length can be adjusted by yourself.

Core components

  • Henan Olten Environmental Sci-Tech Co., Ltd.

    Spiral

    Steel Castings, cast and moulded, grade 4.

  • Henan Olten Environmental Sci-Tech Co., Ltd.

    Mould: 35 Carbon Steel

    Forming cylinder: Steel Castings.

  • Henan Olten Environmental Sci-Tech Co., Ltd.

    Reducer: Snail Reducer

Model MBJ140 MBJ180 MBJ210 MBJ300 MBJ400
Capacity 1-2T/H 2-3T/H 3-4T/H 3-5T/H 6~10T
Forming specifications Φ20~40mm Φ20~60mm Φ20~80mm Φ20~80mm Φ20~80mm
Spindle Speed 46-60rpm 39-60rpm 35~60 rpm 35~60 rpm 35~60 rpm
Spiral Blade 4 4 4 4 4
Power(kw)

Y160M-4 11KW

Y160L-4 15KW

Y160M-4 18.5KW

Y180L-4 22KW

Y200L-4 30KW

Y225S-4 37KW

Y225S-4 37KW

Y225M-4 45KW

Y315M-4 160KW
Remarks The spindle speed is the minimum number of revolutions, which can be adjusted appropriately according to the current, the light load, and the output.

 

 

production line

Henan Olten Environmental Sci-Tech Co., Ltd.

Get In Touch

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

  • *
  • *
  • *