Hoisting Carbonization Furnace

Applicable materials for hoisting carbonization furnace: logs, branches, machine-made rods, coconut shells, bamboo and other materials with a size less than 20cm and greater than 3cm.

Product introduction

Hoisting carbonization furnace is an environmentally friendly and smokeless carbonization equipment. The hoisting carbonization furnace is separated from the combustion chamber, and the movably installed carbonization liner can be used to achieve continuous operation. One furnace body is equipped with three carbonization liners. When the carbonization liner is replaced, no preheating is required. The cooling is completely separated from the furnace body, the work efficiency is high, and the sealing effect is good. The hoisting carbonization furnace can carbonize the machine-made rods produced by the charcoal machine, and can also directly carbonize raw materials such as logs, wood blocks, tree bark, and coconut shells.

Raw materials and finished products

Henan Olten Environmental Sci-Tech Co., Ltd.

Working principle

Put the material to be carbonized into the inner furnace and hoist it into the outer furnace; after sealing, it will be heated without oxygen and pyrolyzed into combustible gas, tar and carbon through moisture removal; the gas produced in this process is processed by the flue gas purification device , To achieve smoke-free emissions; combustible gases are collected and flowed to the bottom of the furnace for combustion and utilization, thereby reducing fuel use and reducing fuel costs.

Henan Olten Environmental Sci-Tech Co., Ltd.

Product advantages

1. Three inner furnaces can be used cyclically, which can be continuous.

2. New five-stage purification device, industry-leading, can be environmentally friendly and smoke-free.

3. Gas recovery device, saving fuel.

4. Various heating methods, available with wood, coal, and natural gas.

Core components

Henan Olten Environmental Sci-Tech Co., Ltd.

1. Hoisting device: national standard channel steel, electric hoist.

2. Outer furnace: thick steel plate, corrosion resistance, high temperature resistance.

3. Liner: thick steel plate, corrosion resistance, high temperature resistance.

4. Insulation layer: high-aluminum insulation bricks with good insulation performance.

5. New type of purification and flue gas recovery: thick steel plate, spray device inside, corrosion resistance and high temperature resistance.

Model Power ( kw ) Capacity ( t/d ) Weight ( t ) Inner furnace volume Machine size(m)
QHL-1
Fan:1.5kw
Hoisting device:0.75kw
1.5-2.1 4.1 2.65*3 3*2*2.2
QHL-2
Fan:2.2kw
Hoisting device:3.7kw
3-4 8.2 2.65*6 6*2*2.2
QHL-3
Fan:3kw
Hoisting device:3.7kw
4-6 12.3 2.65*9 9*2*2.2
QHL-4
Fan:4kw
Hoisting device:3.7kw
6-8 15.8 2.65*12 12*2*2.2

 

 

production line

Henan Olten Environmental Sci-Tech Co., Ltd.

Get In Touch

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

  • *
  • *
  • *