The difference between charcoal burning in earth kiln and charcoal furnace

The difference between charcoal burning in earth kiln and charcoal furnace

1. Professionalism:

Charcoal burning in traditional earthen kilns depends on experience, which may be difficult for novices to master.

Use the carbonization furnace to burn charcoal, and the operation according to the temperature display is simple and convenient.

2. Quality of finished charcoal:

Most people will say that the charcoal of the earth kiln is good, because the carbonization speed of the charcoal furnace will affect the quality of charcoal. We have encountered many carbonization furnaces used by customers, and the charcoal burned is not inferior to earth kilns. Therefore, the use of equipment has little effect on the quality of charcoal, mainly because the raw materials and the firing process are more important.

3. Time efficiency:

The carbonization time of earth kiln is relatively long, and the charcoal is produced only once a week or so.

The carbonization furnace can complete the carbonization operation in 8-10 hours.

4. Environmental protection:

The earth kiln burns charcoal, the flue gas is large, the combustible gas cannot be used, and the environmental protection is increasing in all parts of the world, so it is imperative to switch to the carbonization furnace.

The carbonization furnace has a large output, can recover and purify flue gas, realize return gas combustion, energy saving and environmental protection.

5. Cost investment

The construction cost of earth kiln is relatively low, but it occupies a large area and requires a lot of space and manpower.

The equipment investment cost of the carbonization furnace is relatively high, but the floor space is small and the labor cost is low.