- Wheel Mill
- Disc wood crusher
- Double mouth crusher
- Hammer mill
- Integrated Crusher
- Disc chipper
- Drum Chipper
- Double Shaft Shredder
- Double Cylinder Shisha Charcoal
- Shisha Charcoal Press Briquette Machine
- Ball Press Machine
- Coal Stick Machine
- Briquette Machine
- Stamping Coal Rod Machine
- Continuous Carbonization Furnace
- Sawdust Carbonization Machine
- Hoisting carbonization furnace
- Horizontal Carbonization Furnace
Sawdust Carbonization Machine
Sawdust carbonization machine is to pulverize sawdust, rice husk, coconut husk, etc. and various biomass materials, pulverize (size less than 10mm), dry (moisture less than 15%), and then put them into the furnace to carbonize charcoal powder at one time equipment. Sawdust carbonization machine has the advantages of low power consumption, simple operation, automation, high yield, easy to master carbonization technology, etc. It is ideal equipment for activated carbon plants, mosquito coil plants, firecrackers plants, carbon black plants and carbon powder manufacturers.
Sawdust, rice husk, coconut husk, etc. and various biomass materials are crushed (less than 10mm in size), dried (with a moisture content of less than 15%), and transported through the feeding into the inside of the carbonization pipeline. Ways to seal the feed inlet and add gaskets to the pipe joints to achieve oxygen-free heating, thereby dehumidifying, decomposing and carbonizing. The gas produced in this process is processed by the flue gas purification device to achieve smokeless emission; the combustible gas is collected and sent to the bottom of the furnace body for combustion and utilization.
1.Quantitative feeding, frequency conversion speed regulation, uniform feeding.
2.Equipped with observation holes, convenient for real-time inspection and maintenance.
3.Equipped with 4 new purification tanks, environmentally friendly and smoke-free.
4.Equipped with flue gas recovery device to save fuel.
5.Equipped with cooling discharging conveying, the discharging temperature is controlled below 70℃.
6.24 hours continuous production.
7.Convenient operation, low power, good economy.
8.Various heating methods, wood, coal, gas can be used.
1.Shell: thickened carbon steel. High temperature resistance, corrosion resistance, no deformation.
2.Internal insulation layer: high-aluminum refractory insulation brick, high temperature resistance, good insulation.
3.Fan: high-pressure fan, good stability, strong wind.
4.Carbonized pipes and spiral blades: thickened carbon steel. High temperature resistance, corrosion resistance, no deformation.
5.Cooling and discharging: Double-layer structure, thickened carbon steel. High temperature resistance, corrosion resistance, no deformation.
|Reducer||Power ( kw )||Size ( m )||Capacity ( t/h )||Weight( t )|
Speed regulating motor: 5.5kw
Exhaust fan: 4kw
Screw feeding: 1.5kw
Get In Touch
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.