- Integrated Crusher
- Double Shaft Shredder
- Drum Chipper
- Disc chipper
- Hammer mill
- Double mouth crusher
- Disc wood crusher
- Wheel Mill
- New Double Cylinder Shisha Charcoal Press Briquette Machine
- Briquette Machine
- Coal Stick Machine
- Ball Press Machine
- Shisha Charcoal Press Briquette Machine
- Stamping Coal Rod Machine
- Hoisting carbonization furnace
- Continuous Carbonization Furnace
- Horizontal Carbonization Furnace
- Sawdust Carbonization Machine
Briquette machine is a kind of forming equipment, which passes qualified sawdust and wood materials or biomass materials (size below 5mm, moisture 12%) through spirals, forming cylinders and heating rings, and extrudes them to form wood rods through high temperature and high pressure.
Working principle :
The crushed (size less than 5mm) and dried (moisture less than 12%) biomass materials enter the hopper, and push the material to the forming cylinder through the action of the screw propeller; at this time, the angle between the propeller and the forming cylinder is A huge pressure is formed; and under the high temperature of the heating ring, the material will decompose lignin; the material will shape the material under the combined action of these factors, and finally form a wooden stick.
Final product :
1The available shape: square, hexagonal, hexagon with edge.
2The available diameter could be: 50mm，60mm，80mm.
3The available length could be: 20cm,30cm, 40cm, 50cm.
4Specific gravity: 1300—1900kg/m³ Calorific value: 4500-5000kcal/kg.
1.All main core components have been heat treated and tempered to increase wear resistance and hardness.
2.The output is high, compared with the traditional type, it is more stable and the output is larger.
3.The angle between the professionally designed propeller and the forming cylinder is coordinated with great power. The finished product has high hardness and is not easy to break.
Increase the pitch to increase the feed amount and greatly increase the output.
With electric heating temperature control system to ensure stable discharge molding and improve work efficiency.
Optimize the structure of the forming cylinder, reduce the friction between the machine and the raw material, and increase the density of the rod.
The shape and size of the finished rod are highly selective and can meet different requirements of customers.
Using ceramic heating ring, high thermal efficiency, stability and safety.
Using domestic brand electric devices, it is stable, reliable and safe.
45 High Carbon Steel, four layers welded with wear resistant electrode (Tungsten Carbide 707) in the first ring of the front section, and nickel powder (nickel 35) sprayed on the outside to enhance the wear resistance and high temperature resistance of the thruster.
The forming cylinder has two layers, the outer layer is hollowed out, embedded with tungsten alloy, it has wear resistance and high temperature resistance (other manufacturers use flat round steel, low production cost, simple process, not wear resistance and high temperature characteristics).
|Model||Power(kw)||Capacity(t/h)||Weight(t)||Machine size（m）||Package Size（m）||Finished briquette diameter(mm)|
Get In Touch
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.