Continuous Carbonization Furnace

Continuous carbonization machine is a new type of carbon powder carbonization machine that feeds in the raw materials and discharges the finished carbon. It is an external heating type drying and carbonization conjoined machine. The entire production process can achieve no smoke emission and no pollution to the environment.

  • Henan Olten Environmental Sci-Tech Co., Ltd.Henan Olten Environmental Sci-Tech Co., Ltd.

Product Introduction

Continuous carbonization machine has a wide range of uses, such as; peanut shells, sawdust, corn stalks, bagasse, tree branches, rice husks, bamboo shavings, sorghum stalks, sunflower husks, distiller’s grains, corn cobs, coconut husks, coffee grounds, cotton stalks, bean stalks Biomass materials such as yam grass, dead leaves, scraps from waste pharmaceutical factories, medicine residues, sludge, etc. can all be used. It is the best choice to alleviate the tight supply and demand of national resources and turn waste into treasure.

Working principle

Sawdust, rice husk, coconut husk, etc. and various biomass materials that need to be carbonized (size less than 30mm, moisture content less than 15%) are conveyed through the feeding screw, and sent into the carbonization drum through the screw propeller. Dehumidification, decomposition and carbonization are carried out in a high temperature and oxygen-free environment. The flue gas and combustible gas produced in the whole process are uniformly processed by the flue gas purification and recovery device to achieve smokeless emission; the combustible gas is collected and cyclically burned to form the effect of continuous feeding and continuous carbonization, so as to achieve continuous Chemical production.

Henan Olten Environmental Sci-Tech Co., Ltd.

Product advantages

1. Heating method: gas, natural gas, wood, coal, etc. are available for various options. Equipped with one-key ignition, safe and reliable.

2. Control system: high degree of automation, temperature controllable, air leakage alarm.

3. Flue gas recovery device: It recovers and reuses combustible gases such as carbon monoxide, methane, and oxygen produced during the carbonization process to save fuel.

4. Cooling system: Cooling by circulating water and equipped with high-efficiency large-capacity evaporation tower, high efficiency, to ensure the quality of the finished product.

Core components

1. Rotary drum: boiler steel plate (12mm thick, Q245R), high temperature resistance, good heat preservation.

2. Gear ring: It is made of cast steel parts, quenched and forged, with high hardness, good wear resistance and not easy to break.

3. Base: adopt national standard B-type thick I-beam, with high strength and good stability.

4. Control system: advanced control system, high degree of automation, integrated temperature control, speed control, air leakage alarm and other advantages.

5. Cooling system: It adopts circulating water cooling and is equipped with a large-brand high-efficiency large-capacity evaporation tower, which has high efficiency and guarantees the quality of finished products.

Model Power ( kw ) Weight( t ) Capacity ( t/h ) Drum (m)
Size (m)
LXC1000 47.35 12.5
600-800kg/h
diameter:1*10.5 12*6
LXC1200 47.35 13.5
800-1000kg/h
diameter:1.2*10.5

12*6

 

 

production line

Henan Olten Environmental Sci-Tech Co., Ltd.

Get In Touch

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

  • *
  • *
  • *